SLB EGO V3 MEGA 1300mAh (Complete Pack)

EGO V3 ORIGINAL SLB 1300mAh
COMPLETE SET KIT 

Complete Pack 1 - SLB EGO V3 1300mAh with Evod BCC

1 x EGO V3 Original SLB 1300 mAh
1 x USB Cord
1 x Wall Charger
1 x Kanger Evod/ Estron MT3/ Vision V.Tox BCC
1 x Replacement Coil (Kanger)
1 x Liquid Ejuice MY
1 x Big eGo Case



Complete Pack 2 -  SLB EGO V3 1300mAh with iClear16B

1 x EGO V3 Original SLB 1300 mAh
1 x USB Cord
1 x Wall Charger
1 x Innokin iClear16B BDC
1 x Replacement Coil iClear16B
1 x Liquid Ejuice MY
1 x Big eGo Case



Complete Pack 3 -  SLB EGO V3 1300mAh with CE4

1 x EGO V3 Original SLB 1300 mAh
1 x USB Cord
1 x Wall Charger
3 x CE4 Clearomizer
1 x Liquid Ejuice MY
1 x Big eGo Case






Complete Pack 4 -  SLB EGO V3 1300mAh with Vision Victory

1 x EGO V3 Original SLB 1300 mAh
1 x USB Cord
1 x Wall Charger
1 x Vision Victory Tank
1 x Replacement Coil Vision Victory
1 x Liquid Ejuice MY
1 x Big eGo Case

Complete Pack 5 -  SLB EGO V3 1300mAh with Mini Protank III

1 x EGO V3 Original SLB 1300 mAh
1 x USB Cord
1 x Wall Charger
1 x Kanger Mini Protank III BDC
1 x Replacement Coil Mini Protank III
1 x Liquid Ejuice MY
1 x Big eGo Case

Complete Pack 6 -  SLB EGO V3 1300mAh with EVOD II

1 x EGO V3 Original SLB 1300 mAh
1 x USB Cord
1 x Wall Charger
1 x Kanger Mini Protank III BDC
1 x Replacement Coil Mini Protank III
1 x Liquid Ejuice MY
1 x Big eGo Case



Complete Pack 7 -  SLB EGO V3 1300mAh with Aspire Victory-S Glass BDC

1 x EGO V3 Original SLB 1300 mAh
1 x USB Cord
1 x Wall Charger
1 x Aspire Victory-S Glass BDC
1 x Replacement Coil Mini Protank III
1 x Liquid Ejuice MY
1 x Big eGo Case

Pack 8 -   GS H3 BCC by EstronSmoke

DETAILS:

• Variable Voltage: 3.0v to 6.0v in 0.1v increments.
• Variable Wattage: 3.0w to 15.0w in 0.5w increments.
• Easy OHM Meter
• ON/OFF switching
• USB Pass Through with 40.5 Inch cable.
• 510/eGo Connection capability
• OLED LCD screen
• 14 SECOND VAPING CUT-OFF
• Short circuit or low resistance safety - unit will cut off power and display "LOR" on the LCD screen.
• LCD Sleep mode - LCD will not display if either the "+" or "-" buttons are not pressed for 20 seconds - conserving battery life.

Operating the SLB Mega V3:

  ON/OFF: Click the fire button 5 times within 3 seconds to toggle the unit on and off.

  Ohm/Resistance Meter:Press and hold the "-" button about 2+ seconds and it will display the atomizer resistance.

  PLEASE NOTE THAT THE INSTRUCTION MANUAL GIVES ERRONEOUS INFORMATION ON THE FEATURE OUTLINED ABOVE - RESISTANCE METER - THE INFORMATION WE GIVE HERE IS THE CORRECT METHOD

  SLB Button Lock: So that you don't accidentally press the buttons when carrying in your pocket or your purse or otherwise just using the unit you can press and hold both "+" and "-" buttons simultaneously for about 5 seconds and a small LOCK icon will appear indicating that your unit is LOCKED and the buttons are inactive and you can't accidentally change your wattage or voltage.

  SWITCHING BETWEEN VARIABLE VOLTAGE AND VARIABLE WATTAGE: Press and hold the "+" button about 2+ seconds to toggle back and forth between voltage and wattage variable modes. I small "v" for variable voltage or a small "w" for variable wattage will appear on the screen.

  CHANGING THE VOLTAGE/WATTAGE LEVELS: Press the "+" or "-" buttons to go up or down. The unit will "round robin" when it reaches the end on either extreme.

Dimension and Metrics:

• Length: 132mm or 5.2 inches without cartomizer
• Width: 15.9mm or .6 inches
• 1300mah battery capacity
• Maximum Current Output: 2.5AMP
• Input: DC 5V 500mA
• Charging Time: 3-4 hours. It is suggested to charge the unit when you are down to 1 bar on the charge level on the LCD screen, this will ensure longer battery life.